|Minimum Order Quantity||1 No|
Size: 10 (L) X 10 (B) X 8.5 (H)
The base frame shall be made of pressed mild steel
channel section of C channel for outer frame ISMC and
for cross section
Strong grid pattern shall be provided by C section to
CORNER POST: made by c section box
TOP FRAME & ROOF:
The top frame shall be made using outer c channel,
square pipe, angle, etc. Self-draining type of roof shall
be provided by using plain GI sheets.
SIDE AND END WALLS:
The side and end frame shall be made out of pressed
sections of suitable profiles of sufficient strength. Steel
sheet shall be continuously welded at the top and
bottom of the entire structure to offer better strength to
weight ratio. All gaps shall be sealed at edges, seams, bottom etc. to prevent ingress of moisture. Exterior wall
shall be made up of GI specially corrugated sheets In
office cabin, Interior wall is made from laminated sheet
Inside of cabin 1 coat of red oxide and outer side 1 coat
red oxide with 2 coats of synthetic enamel paint.
25 mm thick Thermocole insulation at side wall & 40
mm thick Thermocole insulation in celling
18 mm thick cement sheet with vinyl carpet
2 nos. of sliding window size of : 2' x 2' with safety grill
and 1 no size of: 4'x3' aluminum open-able window and
1 no Exhaust Fan
1 no size of : 3'x7' Door. The door frame shall be made
out with aluminum powder coated frame and Door shall be insulated made from GI.
Size: 4' x 3' Open able Shutter.
All electric wiring shall be concealed with 2
LED lights and 1 no of cabin fan and 1 no of Wall Fan
PLATFORM: One platform size of :6' x 3'
- Delivery Time: 15-20 Days